Epoxy

Overview

Used to provide watertight seals and a structural bond between PVC, ABS, and fiberglass.

  • SA530
    • Used for bonding PVC, ABS and Fiberglass.
    • Color: Grey
    • Working Time: 20-30 Minutes
    • Cure time at 21˚C: <2 hours (depends on ambient temperature and adhesive bead/joint thickness)
    • Unit Quantities: 300/300 mL cartridge (600 mL total)
    • Shelf Life: See “use by” date on cartridge
    • Dispensing Gun: MA-BATT Gun 600 mL/MA-MANUAL GUN 600 mL
  • ADH100
    • Used for shear joints. Adheres and seals pipe grommets, fasteners, etc.
    • Color: Clear
    • Working Time: n/a (4-minute tack time)
    • Cure time at 21˚C: Handling strength in 12 hours; full cure in 2-3 days
    • Unit Quantities: 300 mL Tube
    • Shelf Life: 2 years from date code shown on product
    • Dispensing Gun: Standard caulking gun

Subscribe to receive emails from AWS
  • This field is for validation purposes and should be left unchanged.
Send Us an Email
  • This field is for validation purposes and should be left unchanged.
Sign Up for AWSUM Pro
  • By submitting this form you agree to the terms of service:
    This program is only intended as a calculation tool and by its use AWS assumes no liability for system performance. The responsibility of system performance will lie with the system designer. By downloading this program, you are agreeing that this tool is for calculation purposes only and AWS is NOT liable for system performance.
  • This field is for validation purposes and should be left unchanged.